Chess Subsea Engineering Limited Oil & Gas Training in Nigeria April 2021 - Dig Deeper Without Leaving Your Desk

Posted on Wed 24th Mar, 2021 - www.hotnigerianjobs.com --- (0 comments)

Take yourself to greater depths right from your desktop with Chess Subsea Engineering live and on-demand learning. We are the first choice for subsea engineering and training in the oil, gas and renewables and we stand out thanks to the quality of our technical capabilities and excellent customer service.


Chess Subsea Engineering Limited Oil & Gas Training in Nigeria April 2021


Following the Nigerian Local Content requirements for oil and gas training to be done indigenously, Chess Subsea Engineering, based in United Kingdom, is providing the following training in Nigeria at a discount of 50% percent off all through the Month of April 2021 only.

Chess Subsea Engineering is fully registered with Oil & Gas Trainers Association of Nigeria (OGTAN) under the following training specialization; Subsea Engineering,Operations & Maintenance, Engineering / Project Management, Fabrication & Construction, Drilling / Subsurface, Instrumentation & Control, Programmable Logic Controller Programming, Solar Installation, Heating Ventilation Air conditioning (HVAC), Process Piping, Health Safety Environment & Security, Academia / Research. Click here to know more.

Offshore Hydrography & Site Investigation (OHSI) Level 1


Purpose
To develop the highly specialized skills and knowledge in the areas of offshore hydrography & site investigation.

Target Audience
OHSI Level 1 is structured for engineers from any disciplines working offshore as subsea surveyor, subsea pipeline engineers, subsea engineers, subsea xmas tree engineer, reliability engineers, integrity engineers, offshore engineers, project managers, supervisors and those considering switching careers into subsea & offshore installation engineering. Offshore Hydrography & Site Investigation (OHSI) Level 1 is structured to bridge the needed knowledge gap at beginner’s to intermediate level.

Description

OHSI Level 1 course coversOffshore Hydrography, Application & Methods, Geophysical Techniques i.e. Bathymetry, Seabed Features, Sub Bottom Profiling, Magnetometry etc., Geotechinical Survey Techniques i.e. Cone CPT, Vibrocore, Box Coring, Vane Testing, T Bar etc., Soil Parameters for Design, Survey Test Summary Report, Report Writing more.

Click here to know more

Course Outline

Section 1: Introduction
  • Offshore Hydrography
  • International Hydrographic Organization (IHO)
  • Fields of Hydrography
  • Importance of Hydrographic Surveying
  • The applications of hydrographic surveying:
  • Methods of Hydrographic Surveying over History
  • Hydrographic Survivor Job
  • Site Investigation
  • Geophysical & Geotechnical Site Investigation
Section 2: Geophysical Survey Techniques
  • Bathymetry
  • Seabed Features
  • Sub Bottom Profiling
  • Magnetometry
Section 3: Geotechinical Survey Techniques
  • Soil Sampling
  • In Situ Testing
Section 4: Stages of Site Investigation
  • Soil Parameters for Design
  • Survey Test Summary Report
Section 5: Report Writing & Case Study
  • Report Writing
  • Team Work Case Study
Assessment
  • Participant underpinning knowledge of offshore hydrography & site investigation techniques will be accessed with short answer multiple-choice questionnaire at the conclusion of the course.
Outcome
  • Participants will gain an in debt understanding of offshore hydrography & site investigation techniques. They will also be able to function with minimum supervision as a Subsea Engineer or Subsea Survey Engineer for IOCs, subsea pipeline
  • Issued directly by Chess Subsea Engineering Europe.
Course Fees:

Online:
N 149,990 Naira Only
Offline: N 289,999 Naira Only

Start Date

Online:1st April 2021 (Indicate preferred start date on registeration booklet if not convenient)
(E-Learning + Live Stream Classes)

Offline: 29th March 2021
Training Venue (Offline Option Only)

Portharcourt:
  • Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria
For Registration:

All course registration is online. Please contact [email protected] directly or email [email protected] or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly with proof of payment.

Drilling Operations & Well Planning Engineering Master Class for Field Technicians & Engineers (OODE) Level 1 & Level 2

Purpose
To develop the highly specialized skills and knowledge required for Drilling Operations & Well Planning Engineering at Level 1 to Level 3.

Drilling Operations & Well Planning Engineering Master Class for Field Technicians & Engineers (OODE) Level 1 & Level 2 is designed for Graduate Transition Engineers, Subsea Engineers, Offshore Engineers, Petroleum Engineer, Well Engineers, Field Technicians and Project Engineers.

Training Mode: Live Online Class / Class Room (options available)

Description
This course covers Well Drilling Operations, Drilling Teams, Function of Drilling Engineer, Types of Oil Rigs i.e. Land Rigs & Marine Rigs e.g. Floating Rigs & Bottom Supported Rigs etc Rotary Drilling, Major Component Categorization & Components, Drilling Problems i.e. Stuck Pipe, Differential / Wall Sticking, Mechanical Sticking, Key Seating, Fishing, Loss Circulation, Borehole Instabilities, Mobile Formation etc, Well Control, Drilling Procedures, Function of Casing, Types of Casing, Casing Accessories, Casing Cementing, Subsea Drilling Risers System Configuration & Components i.e. Lower Workover Riser Package (LWRP) Emergency Disconnect Package (EDP), Stress Joints, Tension Joints, Surface Tree Adapter, Surface Tree, Diverters & Motion Compensating Equipments, Choke & Kill Lines & Drill String and more.

This course is designed to provide detailed knowledge of Drilling Operations & Well Planning Engineering and will assist those who are switching or enhancing their career in deep and ultra-deepwater drilling engineering.

Click here to know more

Course Outlines

Section 1: Drilling Operations & Well Planning Engineering
  • Well Drilling Operations
  • Drilling Teams
  • Function of Drilling Engineer
  • Types of Oil Rigs
  • Rotary Drilling
  • Major Component Categorization
  • Well Control
  • Drilling Procedures
  • Function of Casing
  • Types of Casing & Accessories
  • Casing Cementing
  • Drilling Problems
Section 2: Deepwater Drilling Operations & Control
  • Subsea Drilling Risers System Configuration & Components
  • BOP Adapter Joint
  • Lower Workover Riser Package (LWRP)
  • Emergency Disconnect Package (EDP)
  • Stress Joints
  • Tension Joints
  • Surface Tree Adapter
  • Surface Tree
  • Diverters
  • Motion Compensating Equipment’s
  • Choke & Kill Lines
  • Drill String
Assessment
Participant underpinning knowledge of Drilling Operations & Well Planning Engineering will be accessed with short answer multiple-choice questionnaire at the conclusion of the course.

Outcome
Participants will gain an in debt understanding of Drilling Operations & Well Planning Engineering for deepwater operations. They will also be able to function with minimum supervision as Subsea Drilling Engineer for IOCs, subsea drilling contractor or drilling procurement vendors.

Professional Certificate
  • Issued directly by Chess Subsea Engineering Europe.
  • Participant shall be presented for Offshore Petroleum Training Organization (OPITO) Certification.
Course Fees:

Online: N 49,990 Naira Only
Offline: N149,999 Naira Only

Start Date

Online:1st April 2021 (Indicate preferred start date on registeration booklet if not convenient)
(E-Learning + Live Stream Classes)

Offline: 1st April 2021
Training Venue (Offline Option Only)

Portharcourt:
  • Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria
For Registration:

All course registration is online. Please contact [email protected] directly or email [email protected] or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly with proof of payment.

Well Engineering for Graduate Engineers (WEGE) Level 1

Purpose
To develop the highly specialized skills and knowledge required for Oil & Gas Well Engineering at Level 1.

Well Engineering for Graduate Engineers (WEGE) Level 1 is designed for Geologist, Graduate Transition Engineers, Subsea Engineers, Offshore Engineers, Petroleum Engineer, Well Engineers, Field Technicians and Project Engineers.
Training Mode: Live Online Class / Class Room (options available)

Description
This course covers Formation Pressure, Density & Specific Gravity, Hydrostatic Pressure, Hydrostatic Pressure in Drilling Wells, Weight Materials & Material Balance, Pore Pressure Gradient, Porosity & Permeability, Overburden Pressure & Compaction Theory, Abnormal Pressure, Normal Pressure and Abnormal Underpressure, Origin of Overpressured Formations, Fracture Pressure, Estimating Fracture Pressure, Measuring Fracture Pressure, Leak Off Test (LOT), Top Down Casing Design, Bottom Up Casing Design and more

WEGE Level 1 is designed to provide detailed knowledge of Oil & Gas Well Engineering formation evaluation and will assist those who are switching or enhancing their career in well engineering or well operations.

Click here to know more

Course Outlines


Section 1: Introduction to Well Engineering
  • Formation Pressure
  • Density & Specific Gravity
  • Hydrostatic Pressure
  • Hydrostatic Pressure in Drilling Wells
  • Weight Materials & Material Balance
  • Pore Pressure Gradient
  • Porosity & Permeability
  • Overburden Pressure & Compaction Theory
  • Abnormal Pressure, Normal Pressure and Abnormal Underpressure
Section 2: Origin of Overpressured Formations
  • Undercompaction
  • Uplift
  • Salt Diaparism
  • Massive Shale (Clay Diagenesis)
  • Diagenesis of Sulphate Formations
Section 3: Formation Fracture Pressure
  • Fracture Pressure
  • Estimating Fracture Pressure
  • Measuring Fracture Pressure
  • Leak Off Test (LOT)
Section 4: Casing Design Process
  • Top Down Casing Design
  • Bottom-Up Casing Design
Section 5: Well Engineering Hands on Calculations
  • Leak Off Test
  • Formation Integrity Test
  • Equivalent Mud Weight
  • Equivalent Circulating Density
Assessment
Participant underpinning knowledge of well engineering & formation evaluation will be accessed with short answer multiple choice questionnaire at the conclusion of the course.

Outcome
Participants will gain an in debt understanding of Oil & Gas Well Engineering. They will also be able to function with minimum supervision as Well Engineer or Field Engineer for IOCs, drilling contractor or drilling procurement vendors.

Professional Certificate
  • Issued directly by Chess Subsea Engineering Europe.
  • Participant shall be presented for Offshore Petroleum Training Organization (OPITO) Certification.
Course Fees:

Online: N 59,999 Naira Only
Offline: N155,000 Naira Only

Start Date

Online: 5th April 2021 (Indicate preferred start date on registeration booklet if not convenient)
(E-Learning + Live Stream Classes)

Offline: 5th April 2021

Training Venue (Offline Option Only)

Portharcourt:
  • Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria
For Registration:

All course registration is online. Please contact [email protected] directly or email [email protected] or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly with proof of payment.

Wellhead Engineering for Graduate Well Engineers & Field Technicians (WHEGWEFT) Level 1

Purpose
To develop the highly specialized skills and knowledge required for wellhead engineering, associated components & installation at Level 1.

Wellhead Engineering for Graduate Well Engineers & Field Technicians (WHEGWEFT) Level 1 is designed for Geologist, Graduate Transition Engineers, Subsea Engineers, Offshore Engineers, Petroleum Engineer, Well Engineers, Field Technicians and Project Engineers.

Click here to know more

Training Mode: Live Online Class / Class Room (options available)

Description
This course covers Wellhead Assembly Configurations, Selection of Wellhead, Manufacturing, Working Pressure & Temperature, Material Class, Product Specifications Level (PSL), Casing Head, Casing Head Housing, Casing Head Spool, Casing Hanger, Tubing Head, Tubing Hanger, Test Plugs and Bowl Protectors, Seals Technology, Leveling & Cold Cutting, Welding & Weld Test, Casing Running and Hunger Set, N/U and Test BOP, Installation of Wellhead & Christmas Tree and more

WHEGWEFT Level 1 is designed to provide detailed knowledge of Wellhead Engineering along with associated components and will assist those who are switching or enhancing there career in wellhead engineering or well operations.

Course Outlines

Section 1: Wellhead Surface Equipment
  • Wellhead
  • X-mas Tree
  • Flowline
  • Control & Protection Equipment
Section 2: Wellhead Assemblies, Selection & Classification
  • Wellhead Assembly Configurations
  • Selection of Wellhead
  • Manufacturing, Working Pressure & Temperature
  • Material Class
  • Product Specifications Level (PSL)
Section 3: Wellhead Components
  • Casing Head
  • Casing Head Housing
  • Casing Head Spool
  • Casing Hanger
  • Tubing Head
  • Tubing Hanger
Section 4: Wellhead Assesories
  • Test Plugs and Bowl Protectors
  • Seals Technology
Section 5: Wellhead Installation & Maintenance
  • Leveling & Cold Cutting
  • Welding & Weld Test
  • Casing Running and Hunger Set
  • N/U and Test BOP
  • Installation of Wellhead & Christmas Tree
Click here to know more

Assessment
Participant underpinning knowledge of wellhead engineering, associated components & installation will be accessed with short answer multiple choice questionnaire at the conclusion of the course.

Outcome
Participants will gain an in debt understanding of wellhead engineering, associated components & installation. They will also be able to function with minimum supervision as Wellhead Engineers, Well Engineer or Field Engineer for IOCs, drilling contractor or drilling procurement vendors.

Professional Certificate
  • Issued directly by Chess Subsea Engineering Europe.
  • Participant shall be presented for Offshore Petroleum Training Organization (OPITO) Certification.
Course Fees:

Online: N 49,999 Naira Only
Offline: N145,000 Naira Only

Start Date

Online: 8th April 2021 (Indicate preferred start date on registeration booklet if not convenient)
(E-Learning + Live Stream Classes)

Offline: To be scheduled

Training Venue (Offline Option Only)


Portharcourt:
Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria

For Registration:


All course registration is online. Please contact [email protected] directly or email [email protected] or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly with proof of payment.


Pipeline Instrumentation and Pigging Operations (PIPO) Level 1

Purpose
This course is designed to provide detailed knowledge of pipeline instrumentation & pigging operations and will assist those who are responsible for pipeline pigging operations and managing contractors and those who regulate pipeline pigging.

The course will enable attendees to manage and regulate pipeline pigging projects and contractors more effectively and efficiently.

Training Mode: Live Online Class / Class Room (options available)


Description
This course covers Reasons for Pigging Operations, Pigging Categories, Selection Criteria, Foam Pigs, Solid Cast Pigs, Spherical Pigs or Spheres, Cleaning Pigs, Sealing Pigs, Mandrel Pigs, Inline Inspection Tools, Data needed for Inline Inspection Tools, Ultrasonic Inspection Tools, Types of Gel Pigs, Principles & Application of Gel Pigs, Dual Diameter Pigs, Multi Diameter Pigs, Pig Stucking Issues, Challenges & Solutions, Pig Motion Engineering Analysis & Calculations and more

Click
here to know more

Course Outline

Section 1: Pigging Operations
  • Introduction to Pipeline Pigging
  • Reasons for Pigging Operations
  • Pigging Categories
  • Selection Criteria
Section 2: Utility Pigs
  • Foam Pigs
  • Solid Cast Pigs
  • Spherical Pigs or Spheres
  • Cleaning Pigs
  • Sealing Pigs
  • Mandrel Pigs
Section 3: Inspection Tools
  • Inline Inspection Tools
  • Data needed for Inline Inspection Tools
  • Ultrasonic Inspection Tools
Section 4: Gel Pigs
  • Introduction to Gel Pigs
  • Types of Gel Pigs
  • Principles & Application of Gel Pigs
  • Dual Diameter Pigs
  • Multi Diameter Pigs
Section 5: Pig Stucking Issues, Challenges & Solutions
  • Why do Pig Stuck
  • Sphere Jammed in Off Take Issues & Solution
  • Incorrect Sized Pig Components Issues & Solutions
  • Incorrect Valve / Valve Not Open Issues & Solution
  • Insufficient Information (Wrong Bend Radius) Issues & Solution
  • Pig Pushing On Pig in Front Issues & Solution
  • Colliding Pigs Issues & Solutions
  • High Friction Pigs Issues & Solution
  • Plugging with Wax Issues & Solution
  • Debris In the Line Issues & Solution
  • Flowaround the Pig Issues & Solution
  • Insufficient Sealing Length Issues & Solution
  • Nose Down Issues & Solution
  • Reversal Issues & Solution
  • Proximity of Components Issues & Solution
  • Buckling of Sealing Issues & Solution
  • Reducer Length Issues & Solution
  • Bypass with Reduction in Flow Issues & Solution
  • Dual Module Pig with Leakage Issues & Solution
  • Wear Issues & Solution
  • Coupling Damage Issues & Solution
  • Trapped Cavities Issues & Solution
  • Tearing Seals Out of Boltholes Issues & Solution
  • Pigs In Free Fall Issues & Solution
  • Environmental Issues& Solution
Section 6: Pig Motion Engineering Analysis & Calculations
  • Drag Force on the Pig
  • Pig Velocity
  • Leakage
  • Practical calculation showing the velocity of pig and percentage of the leakage flow
Assessment
  • Participant underpinning knowledge of Pipeline Instrumentation and Pigging Operations will be accessed with short answer multiple-choice questionnaire and case studies at the conclusion of the course.
Professional Certificate
  • Issued directly by Chess Subsea Engineering Europe.
Course Fees:

Online: N 99,990 Naira Only
Offline: N195,000 Naira Only

Start Date


Online:10thApril 2021 (Indicate preferred start date on registeration booklet if not convenient)
(E-Learning + Live Stream Classes)

Offline: To be scheduled

Training Venue (Offline Option Only)

Portharcourt:
  • Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria
For Registration:

All course registration is online. Please contact [email protected] directly or email [email protected] or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly with proof of payment.

Onshore & Subsea Pipeline Stress & Fatigue Analysis with (OSPSFC) CEASAR II Level 1

Purpose
To develop the highly specialized skills and knowledge in the areas of Onshore & Subsea Pipeline Stress Analysis with CEASAR II at Level 1

Training Mode: Live Online Class / Class Room (options available)


Description
The OSPSFC Level 1 & Level 2 is designed to empower you with advanced pipeline flexibility modeling & simulation analysis. The course is backed up real hands-on practical applications to give you an edge in the industry.

Click here to know more

Course Outline


Module 1: Introduction to Subsea Engineering
  • History of Subsea Engineering
  • Subsea Production System
Module 2: Piping & Pipeline Engineering Detailed & FEED Design
  • Piping System Introduction
  • Concept Layout Development
  • Piping Components & their access requirement
  • Straight length requirements
  • Orientation of various tapings, components, etc
  • Piping Drains & Vents
  • Insulation, Material & Sizing
  • Critical piping system consideration
  • Pipe Stress Analysis & Pipe Supports
Module 3: Ceasar Pipe Stress Flexibility Analysis Introduction
  • Introduction to Piping Stress Analysis
  • Theory, Piping components and assumptions; element assembly & Code compliance requirements.
  • Spring Hanger design
  • Pipe supports
  • Stress Intensification Factors
Module 4: Hands On : Onshore Production Pipeline Stress Analysis

Objectives

This case study is designed to demonstrate adding supports in CAESAR II and demonstrate the operating case and restraint load report and give an indication of what the result mean on the restraint load report, along with a short example on how to combat issues with support, such as “lift off”.

Assessment

Participant underpinning knowledge of Onshore & Subsea Pipeline Stress with (OSPSFC) CEASAR II at Level 1 will be accessed with on the job piping section case studies to be presented towards end of course.

Professional Certificate
  • Issued directly by Chess Subsea Engineering Europe.
Course Fees:

Online: N 99,990 Naira Only
Offline: N195,000 Naira Only

Start Date

Online: 12th April 2021 (Indicate preferred start date on registeration booklet if not convenient)
(E-Learning + Live Stream Classes)

Offline: 12th to 16th April 2021

Training Venue (Offline Option Only)

Portharcourt:
  • Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria
For Registration:

All course registration is online. Please contact [email protected] directly or email [email protected] or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly with proof of payment.


Subsea Pipelines Installation Analysis (SPIA) with ORCAFLEX Level 3

Purpose
OrcaFlex is the world’s leading package developed by Orcina for the dynamic analysis of offshore marine systems. SPIA Level 3 is for intermediate to advance OrcaFLEX users and focus mainly on pipeline installation modeling & analysis via a rigid stinger. Two (2) main method of pipe lay analysis are presented; namely the simple and explicit.

Training Mode: Live Online Class / Class Room (options available)


Description
SPIA Level 3 is purely hands on workshop and gives a comprehensive understanding of how to use the OrcaFlex software for pipe lay analysis either using the simple or explict method. Deligate will learn how to defines x, y, z coordinates for each stinger support method based on project complexity.

Click here to know more

Section 1: Offshore Pipeline Installation
  • Introduction to Subsea Pipeline Installation
  • Subsea Pipeline Laying Techniques
  • Subsea Pipelay Vessels
  • OrcaFLEX for Pipe Lay Analysis
Section 2: 10-inch Production Pipeline S Lay Installation Simulation via
Articulated Stinger using ORCAflex Simple Method
  • Introduction to Pipelay Simulation using ORCAFLEX Simple Method
  • Building the Model & Setting General Data
  • Building the Model & Setting Vessel Data
  • Building the Model & Setting Line Data
  • Building the Model & Setting SHEAR 7 Data
  • Building the Model & Setting VIVA Data
  • Building the Model & Setting All Object Data
  • Result Analysis of Pipe lay Simulations
Section 3: 10-inch Production Pipeline S Lay Installation Simulation via
 Articulated Stinger using ORCAflex Explicit Method
  • Introduction to Pipelay Simulation using ORCAFLEX Explicit Method
  • Building the Model & Setting General Data
  • Building the Model & Setting Vessel Data
  • Building the Model & Setting Line Data
  • Building the Model & Setting SHEAR 7 Data
  • Building the Model & Setting VIVA Data
  • Building the Model & Setting All Object Data
  • Result Analysis of Pipe lay Simulations
Outcome
Participants will gain an in debt understanding of Subsea Pipelines Installation Analysis with ORCAFLEX at Level 3.
They will also be able to function with minimum supervision as a Subsea Engineer for IOCs, subsea pipeline company contractor, vendor or installation company.

Certificate of Completion


At the end of the course certificate of Completion Based on Scottish NVQ standard Level 4 & 5 shall be issued directly from Chess Subsea Engineering Europe.

Course Fees:

Online: N179,990 Naira Only
Offline: N299,999 Naira Only

Start Date


Online: 19th April 2021 (Indicate preferred start date on registeration booklet if not convenient)
(E-Learning + Live Stream Classes)

Offline: 19th to 23rd April 2021

Training Venue (Offline Option Only)

Portharcourt:
Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria

For Registration:

All course registration is online. Please contact [email protected] directly or email [email protected] or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly with proof of payment.


Deepwater Offshore & Subsea Operations Engineering Project Design & Planning (DOSOEPDP) Level 2

Purpose
To develop the highly specialized skills and knowledge required for Deepwater Offshore & Subsea Operations Engineering Project Design & Planning at Level 2.

Deepwater Offshore & Subsea Operations Engineering Project Design & Planning (DOSOEPDP) Level 2 is designed for Offshore Engineers, Subsea Engineers, Offshore Project Engineers, Offshore Installation Manager, Structural Design Engineers & Business Development Managers.

Course Outline
  • Offshore EPIC Project Interface Architecture
  • Case Study of Subsea Pipeline Operations Engineering Project Design & Planning
  • EPC Concept Selection & FEED
  • Detailed Engineering Design Detailed Categories
  • Pipeline FEED / Detailed Design Engineering Design Code
  • Fabrication & Installation
  • Pre-Commissioning & Commissioning Activities
  • Tie Ins & Protection
Assessment
Participant underpinning knowledge of deepwater offshore & subsea operations engineering project design & planning will be accessed with short answer multiple-choice questionnaire at the conclusion of the course.

Outcome
Participants will gain an in debt understanding of Deepwater Offshore & Subsea Operations Engineering Project Design & Planning along with core interface management. They will also be able to function with minimum supervision as a Subsea Engineer for IOCs, subsea pipeline company contractor, vendor or installation company.

Professional Certificate
  • Issued directly by Chess Subsea Engineering Europe.
  • Participant shall be presented for Offshore Petroleum Training Organization (OPITO) Certification.
Course Fees:

Online: N120, 000 Naira Only
Offline: N220, 000 Naira Only

Start Date


Online: 26 thApril 2021 (Indicate preferred start date on registeration booklet if not convenient)
(E-Learning + Live Stream Classes)

Offline: 26th to 30th April 2021

Training Venue (Offline Option Only)

Portharcourt:
  • Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria
For Registration:

All course registration is online. Please contact [email protected] directly or email [email protected] or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly with proof of payment.


MEET OUR CLIENTS & PARTNERS

Globally recognized worldwide