Enterprise Network Engineer at Ascentech Services Limited

Ascentech Services Limited is a full-fledged Human Resource Solution Provider incorporated in 2013 with its Head Office in Lagos, Nigeria. We are committed to forging long-term partnerships with our clients by creating and delivering robust and flexible services that address the changing needs of their business.

We are recruiting to fill the position below:

Job Title: Enterprise Network Engineer

Location: Oregun, Lagos
Employment Type: Full-time

The Job

• Microwave radio links planning & design. Understand the complete Operator's IP/MW network, ensure best cost effective design, adequate network & technology as well as ensure the consistency of the provided internet service
• Support presales activities, including pre-studies, Customer baby care visit and hand holding.
• Check P2P, P2MP, Fiber, Estate (WTTH/Wireline) feasibility of a site
• Ensure uptime of Enterprise links based on 99.99% SLA by proactive checks and speedy resolution of customer complaints
• Post-incident analysis as part of the Problem Management process & for approving any change that affects the network (or service) topology.

Responsibilities & Tasks / Deliverables

• Implement and optimize IP and Microwave network infrastructure or create links (point to point or point to multipoint) on Ethernet/Fiber, within existing guidelines and procedures, keeping in mind the business and/or project requirements.
• Implement and optimize Microwave Radio point-to-point and point-to-multipoint transport, within existing guidelines and procedures, keeping in mind the business, pre-sales and/or project requirements.
• Build, configure, optimize, and accept new network elements, conforming to designs and change management procedures, to implement and activate new services or capacity upgrades with a minimum of disruption of the availability of the service. E.g. radios, switches, Routers, AP, Extenders from vendors such as: Proxim, Radwin, Ubiquity, Cambium, Ligowave. Cisco, D-Link, Mikrotik, Netgear, Etc.
• Perform Radio Links Design and planning, using available Tools.
• Perform Radio links profiles and feasibility using available Tools. AGL means 'Above Ground Level' while AMSL means 'Above Mean Sea Level'.
• Use and update Customer Tools and Databases within existing guidelines and procedures, keeping in mind the business, pre-sales and/or project requirements.
• Prepare changes following the local change regime in the live network of the operators.
• Prepare IP and Microwave node configurations to support new services and operators, conforming to available templates.
• Actively maintain and develop knowledge of the competence area, in order to be able to perform the activities with a sufficient knowledge level.
• Advise, deliver input and recommend technical improvements to Technical Managers (SPOC), Project Managers and Performance and Quality Managers, in order to contribute to the optimization of the networks.
• Prepare IP node configurations related to cabling, to support new services and operators, conforming to available templates.
• Check P2P, P2MP, Fiber, Estate (WTTH/Wireline) feasibility of a site.
• Site installation document; Floor plan drawing; Site cabling; Site cable label.

Position Qualifications

• Bachelor's Degree in Engineering (Computer Science or equivalent experience) or combination of related education and experience.
• At least 2 years relevant working experience.
• Good understanding of operator business drivers and technologies in the IP and MW network areas.
• Broad overview of IP technologies. Good acquaintance with TCP/IP protocols and networks
• Experience of IP and MW Planning and Design on Telecom/ISP based networks
• Basic knowledge of MPLS, IS-IS, MPBGP, OSPF, L3VPN, L2VPN; MVPN; VPLS, SNMP; VLAN; Ethernet
• Basic knowledge of QoS in IP networks
• Basic knowledge of routers/switches and IOS
• Working knowledge of any MW Tools
• IP Certifications on Juniper and/or Cisco is a plus.
• Working knowledge of any of the following Tools: CACTI, Radwin Manager, Proxim NMS, IPAM Tool, Cambium, PRTG is a plus
• Basic knowledge over cabling area (optical, electrical).

Personal Skills:

• Presentation and communication skills, able to advise in a convincing way, verbally as well as on paper.
• Ability to work with teams from different locations.
• Knowledge sharing & Collaboration skills.
• Strong knowledge of English language, spoken and written.

Salary
N150,000 - N250,000 monthly

Application Closing Date
15th November, 2022.

Method of Application
Interested and qualified candidates should send their CV to: [email protected] using the Job Title as the subject of the mail.