Instrument (PACO) Engineer, Maintenance Services at Western Development Company Limited (WDCL)

Western Development Company Limited (WDCL) is an independent limited liability company, established in Nigeria for over 13 years ago. WDCL is the sole representative of various overseas companies in the fields of Information Technology, Telecommunications, Mechanical Engineering and Electrical/Electronic Engineering.

We are recruiting to fill the position below:

Job Title: Instrument (PACO) Engineer, Maintenance Services

Location: Rivers
Job Type: Contract
Gender: Male / Female
Job Category: Engineering

Roles and Responsibilities     

• Troubleshooting of safety critical equipment and control/safeguarding system.
• Supporting the production staff in maintaining facilities.
• Assist the maintenance team to cope with high number of activities to sustain asset integrity/equipment availability.
• Comply with HSE practises and procedures.
• Assist to ensure Technical Integrity and safe operation of new process & utility system to achieve the facility’s objectives.
• Identify any area of new facilities requiring Change Control and document the change proposal.
• Provide specification for critical spare/or replacement with vendor details (e.g. Hard disc for compressor control, etc)
• Review operating/maintenance procedure under current reality and propose changes.
• Develop (Maintenance Job Routines) MJRs/maintenance procedures and work packs.
• Identify vendor support requirement for equipment maintenance.
• Provide technical support in repairing outstanding mal-functioning equipment (e.g. crude transfer pumps etc)
• Liaison with OEMs for trouble shooting, spare parts, field technical supports etc.
• Support the maintenance (operation) team in all trouble shooting exercises.
• Carryout maintenance routine activities in line with company standards, local and international standards.
• Participate in equipment failure RCA (Root Cause Analysis), investigation and improvement initiatives.
• Participation in MFI (Management Facility Inspections) and HSE meetings
• Close out personal MFI actions

Academics 

• B.Sc / B.Eng or HND in Mechanical or Elec / Elect or Instrumentation & Controls Automation Engineering or any other relevant discipline.
• Certificate from School of basic Instrumentation will be an added advantage.

Gender:

• Male/Female

Work Experience:

• Minimum of 5 years relevant experience in SPDC operation as a PACO technician

Skills:

• Must possess competence No.1 plus at least one of Nos. 2 – 5 

General instrumentation:

• Ability to read drawings – PEFS, PSFS, C&E, FLD, loop diagrams, etc.
• Sound knowledge of process instrumentation – major process parameters measured, types of sensors/instruments, principles of measurement, etc.
• Sound knowledge of loop components – IS barriers, surge protectors, FISCO, I/O modules
• Sound knowledge of communication protocols – HART, Foundation Fieldbus, Modbus, Profibus, DeviceNet, etc
• Sound knowledge of Fire & Gas devices – different types of detectors, principles of operation, Logic Solvers, Output Devices, etc.
• Sound knowledge of operation and maintenance of valves – control valves, SDVs, BDVs, solenoid valves, Actuators, positioners, position transmitters, air regulators, different types of manual valves, etc.
• Skilled in calibration of switches and transmitters (pressure, differential pressure, level, temperature, flow, and absolute pressure)
• Skilled in maintenance of valves (control valves, ESDVs, MOVs, manual valves), positioners, I/P converters
• Skilled in use of handheld communication devices (Field Communicator, Interrogator, Fieldmate, NI Fieldbus Communicator, FB Tool, Oscilloscope, etc.)

Yokogawa DCS/SIS engineering and maintenance:

• Installation and configuration of Foundation Fieldbus devices using the Engineering Workstation (EWS)
• Engineering of systems using the SIS EWS
• Installation and configuration of HART devices
• Engineering of CentumVP software, including navigation and editing of function blocks
• Use of Yokogawa AMS to manage field devices
• Navigation, configuration, and logic modification of ProSafe safety systems using ProSafe-PLC 4-mation & ProSafe-RS Workbench
• Ability to work on PraSafe SLS – Logic navigation using FLD, sound knowledge of SLS modules

Allen Bradley Systems engineering and maintenance:

• Sound knowledge (including engineering and maintenance) of ControlLogix, RSLogix5000, RSLogix500
• Installation and configuration of field devices
• Engineering and maintenance of Allen Bradley PLCs using RSLogix5000, RSLogix500, RSFieldbus and FactoryTalk software
• Installation and configuration of PLCs, I/O modules, and other associated components
• Programming techniques, program upload/download to PLCs
• HMI engineering, PanelView, etc.
• Connection and use of laptop for PLC engineering

SMAR Systems engineering and maintenance:

• Installation and configuration of Foundation Fieldbus devices
• Engineering of System 302 software, including navigation, editing of function blocks
• Installation and configuration of PLCs, I/O modules and other associated components
• Programming techniques, program upload/download to PLCs
• System302 HMI engineering, ProccessView, etc
• Connection and use of laptop for PLC engineering

DeltaV DCS engineering and maintenance:

• Installation and configuration of Foundation Fieldbus devices using EWS
• Engineering of DeltaV software, including navigation and editing of function blocks
• Installation and configuration of DCS controllers and I/O modules
• HMI graphics modification

Soft Skills:

• Perform basic computer related activities
• Knowledge of worksite hazard mgt and permit to work systems
• Ability to multi task effectively
• Communication & teamworking.
• Ability to work under pressure.
• Good organizational skills
• Flexibility and adaptability.
• Self-Motivated and performs under minimal supervision

Work Cycle:

• The work location is Swamp-field based (Soku, Rivers State) accessible via the Helicopter.
• The job activity period is daily on 12-hour (7am to7pm) routine over a 14-day period.
• The successful candidate will manage own absences with his/her contractor for suitable qualified covers.
• The successful candidate is expected to be Port Harcourt based
• There may be need for periodic visits to Shell industrial area for trainings and official assignments.
• Personnel may be required to work extended hours as need may arises.

Application Closing Date
14th September, 2024.